Author: Balaji, SGI/GFDL.
Features of mkmf include:
mkmf is pronounced make-make-file or make-m-f or even McMuff (Paul Kushner's suggestion).
The calling syntax is:
mkmf [-a abspath] [-c cppdefs] [-d] [-f] [-m makefile] [-p program] [-t template] [-v] [-w] [-x] [args]
A sourcefile is any file with a source file suffix (currently .F, .F90, .c, .f. .f90). An includefile is any file with an include file suffix (currently .H, .fh, .h, .inc). A valid sourcefile can also be an includefile.
Each sourcefile in the list is presumed to produce an object file with the same basename and a .o extension in the current working directory. If more than one sourcefile in the list would produce identically-named object files, only the first is used and the rest are discarded. This permits the use of overlays: if dir3 contained the basic source code, dir2 contained bugfixes, and dir1 contained mods for a particular run, mkmf dir1 dir2 dir3 would create a makefile for correct compilation. Please note that precedence descends from left to right. This is the conventional order used by compilers when searching for libraries, includes, etc: left to right along the command line, with the first match invalidating all subsequent ones. See the Examples section for a closer look at precedence rules.
The makefile currently runs $(FC) on fortran files and $(CC) on C files (unless the -w flag is specified). Flags to the compiler can be set in $(FFLAGS) or $(CFLAGS). The final loader step executes $(LD). Flags to the loader can be set in $(LDFLAGS). Preprocessor flags are used by .F, .F90 and .c files, and can be set in $(CPPFLAGS). These macros have a default meaning on most systems, and can be modified in the template file. The predefined macros can be discovered by running make -p.
In addition, the macro $(CPPDEFS) is applied to the preprocessor. This can contain the cpp #defines which may change from run to run. cpp options that do not change between compilations should be placed in $(CPPFLAGS).
If the -w flag is given the commands run are $(MPIFC) on fortran files, $(MPICC) on C files, and $(MPILD) for the loader step. The flags retain their same values with or without the -w flag. (This is a local addition.)
Includefiles are recursively searched for embedded includes.
For emacs users, the make target TAGS is always provided. This creates a TAGS file in the current working directory with a cross-reference table linking all the sourcefiles. If you don't know about emacs tags, please consult the emacs help files! It is an incredibly useful feature.
The default action for non-existent files is to touch them (i.e create null files of that name) in the current working directory.
All the object files are linked to a single executable. It is therefore desirable that there be a single main program source among the arguments to mkmf, otherwise, the loader is likely to complain.
The argument list args is treated sequentially from left to right. Arguments can be of three kinds:
a.f90 b.f90 f90 -Oaggress c.f90
This will add a.f90, b.f90 and c.f90 to the sourcefile list. The first two files will be compiled using the generic command $(FC) $(FFLAGS). But when the make requires c.f90 to be compiled, it will be compiled with f90 -Oaggress.
The current working directory is always the first (and top-precedence) argument, even if args is not supplied.
The argument cppdefs is treated as follows. cppdefs should contain a comprehensive list of the cpp #defines to be preprocessed. This list is compared against the current "state", maintained in the file .cppdefs in the current working directory. If there are any changes to this state, mkmf will remove all object files affected by this change, so that the subsequent make will recompile those files. Previous versions of mkmf attempted to touch the relevant source, an operation that was only possible with the right permissions. The current version works even with read-only source.
The file .cppdefs is created if it does not exist. If you wish to edit it by hand (don't!) it merely contains a list of the cpp flags separated by blanks, in a single record, with no newline at the end.
cppdefs also sets the make macro CPPDEFS. If this was set in a template file and also in the -c flag to mkmf, the value in -c takes precedence. Typically, you should set only CPPFLAGS in the template file, and CPPDEFS via mkmf -c.
Include files are often specified without an explicit path, e.g
mkmf first attempts to locate the includefile in the same directory as the source file. If it is not found there, it looks in the directories listed as arguments, maintaining the same left-to-right precedence as described above.
This follows the behaviour of most f90 compilers: includefiles inherit the path to the source, or else follow the order of include directories specified from left to right on the f90 command line, with the -I flags descending in precedence from left to right.
If you have includefiles in a directory dir other than
those listed above, you can specify it yourself by including
-Idir in $(FFLAGS) in your template
file. Includepaths in the template file take precedence over those
generated by mkmf. (I suggest using
FFLAGS for this rather than CPPFLAGS
because fortran includes can occur even in source
requiring no preprocessing).
FC = f90 LD = f90 CPPFLAGS = -macro_expand FFLAGS = -d8 -64 -i4 -r8 -mips4 -O3 LDFLAGS = -64 -mips4 $(LIBS) LIST = -listingThe meaning of the various flags may be divined by reading the manual. A line defining the make macro LIBS, e.g:
LIBS = -lmpimay be added anywhere in the template to have it added to the link command line.
Sample template files for different OSs and compilers are available in the directory /net/vb/public/bin.
The directory /home/src/base contains the files:
a.f90 b.f90 c.f90
mkmf path_names /home/src/baseproduces the following Makefile:
# Makefile created by mkmf $Id: mkmf.html 6341 2013-07-31 14:24:51Z nancy $ .DEFAULT: -touch $@ all: a.out c.o: /home/src/base/c.f90 $(FC) $(FFLAGS) -c /home/src/base/c.f90 a.o: updates/a.f90 $(FC) $(FFLAGS) -c updates/a.f90 b.o: updates/b.f90 $(FC) $(FFLAGS) -c updates/b.f90 ./c.f90: /home/src/base/c.f90 cp /home/src/base/c.f90 . ./a.f90: updates/a.f90 cp updates/a.f90 . ./b.f90: updates/b.f90 cp updates/b.f90 . SRC = /home/src/base/c.f90 updates/a.f90 updates/b.f90 OBJ = c.o a.o b.o OFF = /home/src/base/c.f90 updates/a.f90 updates/b.f90 clean: neat -rm -f .cppdefs $(OBJ) a.out neat: -rm -f $(TMPFILES) localize: $(OFF) cp $(OFF) . TAGS: $(SRC) etags $(SRC) tags: $(SRC) ctags $(SRC) a.out: $(OBJ) $(LD) $(OBJ) -o a.out $(LDFLAGS)
Note that when files of the same name recur in the target list, the files in the updates directory (specified in path_names) are used rather than those in the base source repository /home/src/base. Assume that now you want to test some changes to c.f90. You don't want to make changes to the base source repository itself prior to testing; so you make yourself a local copy.
You didn't even need to know where c.f90 originally was. Now you can make changes to your local copy ./c.f90. To compile using your changed copy, type:
mkmf path_names /home/src/base makeThe new Makefile looks like this:
# Makefile created by mkmf $Id: mkmf.html 6341 2013-07-31 14:24:51Z nancy $ .DEFAULT: -touch $@ all: a.out c.o: c.f90 $(FC) $(FFLAGS) -c c.f90 a.o: updates/a.f90 $(FC) $(FFLAGS) -c updates/a.f90 b.o: updates/b.f90 $(FC) $(FFLAGS) -c updates/b.f90 ./a.f90: updates/a.f90 cp updates/a.f90 . ./b.f90: updates/b.f90 cp updates/b.f90 . SRC = c.f90 updates/a.f90 updates/b.f90 OBJ = c.o a.o b.o OFF = updates/a.f90 updates/b.f90 clean: neat -rm -f .cppdefs $(OBJ) a.out neat: -rm -f $(TMPFILES) localize: $(OFF) cp $(OFF) . TAGS: $(SRC) etags $(SRC) tags: $(SRC) ctags $(SRC) a.out: $(OBJ) $(LD) $(OBJ) -o a.out $(LDFLAGS)
Note that you are now using your local copy of c.f90 for the compile, since the files in the current working directory always take precedence. To revert to using the base copy, just remove the local copy and run mkmf again.
mkmf -c "-Dcppflag -Dcppflag2=2 -Dflag3=string ..."
will set CPPDEFS to this value, and also save this state in the file .cppdefs. If the argument to -c is changed in a subsequent call:
mkmf -c "-Dcppflag -Dcppflag2=3 -Dflag3=string ..."mkmf will scan the source list for sourcefiles that make references to cppflag2, and the corresponding object files will be removed.
it would confuse mkmf. Similarly, a fortran include statement must not be split across lines.
use module1; use module2
is to be avoided.
#ifdef obsolete #include "nonexistent.h" #endif
Please address all inquires to Balaji,